sahand Powder Mastic porcelain Tile Adhesive 20kg

مسحوق لاصق بلاط بدون غبار من ساهاند 20 كجم
/5

Product Description

Ceramland porcelain tile adhesive is used to install all porcelain tiles and ceramics on the floors and walls of rooms, halls, bathrooms, lobbies and corridors. This product is easy to prepare, quick to apply, has strong adhesion and is highly durable, and is recommended for installing ceramics up to 60 x 120 cm in size.

Description

A flexible, cement-based tile adhesive ideal for large format and rectified edge tiles.

  • Commercial grade
  • Dust Less Technology
  • Non-vertical slump for easy wall tiling

Usage Surfaces

Most common substrates; building boards including compressed and fibre cement sheet, fully cured concrete, screed (cured for 7 days), rendered brickwork and blockwork, Davco waterproofing membranes and acoustic underlays.

 

Tiles porcelain

Ideal for large format and rectified (square) edge tiles, porcelain, ceramic, mosaic and marble tiles.

 

Areas

Suitable for interior and exterior applications. Commercial and domestic walls and floors including high foot traffic locations, bathrooms, showers, kitchens, laundries, living rooms, balconies and patios.

 

Sika Davco Powder Mastic Advantages

  • Commercial grade
  • Dust Less Technology
  • Non-vertical slump for easy wall tiling
  • Use for thick or thin bed tiling
  • Extended open time for tiling large areas
  • White formulation ideal for light coloured tiles and stone

 

MIX PREPARATION
Mix Process

1. Measure the required amount of clean, potable water into a clean bucket, as per the following:
SITUATION / REQUIREMENT
MIX REQUIREMENTS PER 20KG
General applications
5L – 6L of clean, potable water

2. Slowly add the powder into the water while mixing with a mixing paddle attached to a drill. Always add the powder to the liquid. Do not mix by hand.

3. Continue to mix for several minutes until a creamy consistency is achieved, free of lumps of powder.

4. Allow mixture to stand for 5 minutes, remix then use the adhesive.

Tile adhesive vs. cement-sand mortar

iranian  porcelain tile adhesive is actually an engineered cement-based mortar. What is done in traditional methods is to make a mortar from a combination of sand, cement, gravel, etc. manually. The efficiency of this method depends greatly on the accuracy, experience, and performance of the workers, and the possibility of a decrease in the quality of the mortar with changes in the proportions of its ingredients will be very high.

Additional information

color

Packaging

20 kg

Reviews

There are no reviews yet.

Be the first to review “sahand Powder Mastic porcelain Tile Adhesive 20kg”

Your email address will not be published. Required fields are marked *

Search Products